CARBIDE BULL SET

Using the bull set is a 2 person operation for roughing out or shaping large blocks of stone. One person holds the hammer, angling the blade slightly toward the outside of the stone. The other person then hits it with the striking hammer. With use, the breaking edge of the hammer will wear down; the hammer can then be turned around on its handle and the other side used. THIS HAMMER IS NOT MEANT TO BE SWUNG. Carbide lasts longer and requires less maintenance than steel; however, it is more vulnerable to breaking if placed on an uneven surface. Be sure to use the carbide bull set only on sawed or polished blocks. Handles sold separately.

	8 lb carbide bull set, use with 32" handle		Price:	QTY:

	10 lb carbide bull set, use with 32" handle		Price:	QTY:

	12 lb carbide bull set, use with 32" handle		Price:	QTY: