Anti-stain (water and oil proof), suggested or polished marbles like : carrara, Thassos, Trani, Botticino, marfill and similars stone. Can be used for external use. Does not change the colour of the stone. HYDREX operates on the surface of materials, it stops microporosities so that prevents liquids from penetrating the material but it remains permeable to vapours letting materials breath and keeping their characteristics unchanged.
The product must be evenly applied on dry and clean materials. The presence of water, dust or dirty matter may influence the result regarding the uniformity of the surface. We suggest to spread the product using a sponge or cloth. Use the right quantity that the material naturally can absorb. Then clean (buff) immediately the surfaces by a cleaned cloth. Any excess of HYDREX creates superficial glossy and sticky films, so the excess must be removed immediately after the application. We suggest to apply 2 times the HYDREX , after some minutes from the first application, apply again the HYDREX and repeat the same procedure. In case of floor application, wait 24 hours before walking on the surface. After usage, close the tins well sealed.
Technical Info Sheet: http://www.tenax.it/web/doc/hydrex__1216.pdf
CAUTION: Classified as Dangerous Goods. Must be shipped by roadfreight if being delivered outside of Sydney. (Only one charge needed per consignment, regardless of quantity). Please add the DGS by clicking here:
