HOSKIN DIAMOND PRODUCTS Pty Ltd

IMPORTANT SAFETY INFORMATION RELATING TO DIAMOND BLADE USE

Use the correct diamond blade specification and proper saw for material to be cut. If in doubt, please ask us for advice. Use of the wrong type of blade may cause premature wear, or low cutting performance. Inspect the diamond blade for damage before mounting on saw. Check the saw for proper and safe operating conditions. Be sure the diamond blade is mounted on correct diameter shaft, with arrow in the proper direction and the blade flange is securely tightened with wrench. Always wear proper safety equipment: safety glasses, protective clothing, safety footgear and respiratory equipment where required. Inspect the diamond blade periodically during use for fatigue cracks, segment damage, core flatness, arbor hole damage and undercutting. Never operate any saw without safety guards in place and properly secured. Don't exceed maximum safe operating speed established for the diamond blade. Don't force, jam or twist the diamond blade while cutting. Don't use the sides of the diamond blade for grinding. To avoid overheating, don't make long continuous cuts with dry diamond blades. Allow the diamond blade to cool by running it in the air freely every few minutes.